Application

It is suitable for rubber boats . inflatable boats . fishing boats . sailboats . yachts . canoes . kayaks . rubber boats . aluminum alloy boats . etc. with a stern height of 16.53 inches or less . assisting aquaculture . water transportation . net fishing . luring . outboard backup . outings . and river cleaning/maintenance.

Specifications

• Material: Aluminum Alloy . Rubber
• Color: Grey
• Surface Treatment: Spray Paint
• Assembly Required: No
• Number of Items: 1
• Engine: 2-stroke 3.5hp
• Displacement: 49cc
• Gear Ratio: 2.08(27:13)
• Number of Cylinders: 1
• Max. Output: 2.5KW
• Max. Speed: 4000-5000r/Min
• Noise: About 80DB
• Gear Positions: Clutch
• Ignition System: CDI
• Cooling System: Half Water-cooling . Half Air-cooling
• Control System: Tiller Control
• Starting System: Manual Start
• Gasoline: No.92 Lead-freeGasoline
• Fuel Type: Mixed Oil (Run-in Period: 25 Gasoline: 1 2-stroke Engine Oil; after Run-in Period: 50 Gasoline: 1 2-stroke Engine Oil)
• Trim And Tilt System: Manual Tilt
• Fuel Tank Capacity: 1.3L/0.34gal
• Fuel Consumption Rate: 1.1L/0.3gal/h
• Propeller Diameter: 17cm/6.7in
• Joystick Length: 40cm/15.74in
• Handle Length: 13cm/5.1in
• Fixed Screw Spacing: 12cm/4.7in
• Adaptive Transom Plate Height: ??42cm/16.53in
• Gross Weight: 11.95kg/26.3lbs
• Net Weight: 9.8kg/21.6lbs
• Product Size: 90*38*18cm/35.4*15*7in
• Package Size: 95*43*30cm/37.4*17*11.8in

Package Included

1*Outboard Motor

1*Tool Kit

1*Fuel Oil Mixing Bottle

1*Funnel

1*Spare Pull Rope

1*English Manual

Notes

1.Please carefully read the manual and strictly follow the precautions to have a better experience.

2.Please measure the height of your boat before purchasing to ensure suitability for this product.

3.Please start the motor in the water. If the motor stops circulating water . please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.

4.Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours . during which the fuel ratio is 25L (6.6 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours . the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.

5.Please do not drive too fast during the running-in period. After the running-in period . the gear oil needs to be replaced . and the second replacement time is about 100 hours or 6 months later.

6.Please do not leave this product outside until the cooling water is completely used up. Otherwise . water will enter the cylinder through the exhaust port . leading to engine failure. After cruising in seawater or turbid water . please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place . and avoid direct exposure to sunlight.

7.If not in use for a long time . please thoroughly clean the gasoline in the fuel tank.

8.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement . and make sure you do not mind before you order.